Sagemcom F@st 1704 router configuration

Sagemcom F@st 1704 router configuration

LOGIN TO THE ROUTER

1. Connect your Router Port 4 to ONT port 1 (this is default port for internet, if settings are not changed in ONT) and connect your computer to Router 2 or 3.
2. Open Internet Explorer/Firefox type http://192.168.1.1 or http://myrouter
3. Give username admin and password admin

INTERNET CONNECTION SETUP

• Go to Advanced Setup > LAN Ports
• Select (tick on) ENET (1 - 4) option > Click Appy/Save button.

• 
  
• go to wan service > remove any existing configuration
• go to advanced setup>atm interface > remove existing atm configuration
• Go to Advanced Setup > Layer 2 Interface > Ethernet Interface.
• Select Port 4 (eth0.5/ENET 4) > Click Next on any default setting appearing on next screen > Click Apply/Save.

• Go to Advanced Setup > WAN Service
• Click on Add button.
• Select the ET0.5/ENET 4 > Next > Select PPPoE option > Next
• Give username, password.
• Click Next > Next > Next > Apply/Save.

• Reboot your router.

WIRELESS CONNECTION SETUP

• Click on Wireless option
• Select Enable Wireless Option > Give any SSID > Click Apply/Save button.
  
  
  
•  Go to Security option of Wireless tab > Disable the Enable WSC option. Select WPA2 with TKIP/AES for better security > Give wireless password > Click Apply/Save button